Page 35 - alienHero HD-SDI Guide
P. 35

Adds 8
Kontrol & Kommand Module timed relays
to your
system!
Control building & electrical systems

using the Kontrol & Kommand module & the alienDVR

REL008 Vital Stats:

 Control lights, gates,
or whatever you want
 Creates building automation with
an AlienDVR
 Easy to use & configure
Pick a message or sound that fts your need! How can I use  Adds Value to your DVR installation
Kontrol & Kommand in  Works with same software
my security system? as AlienDVR
276 at www.systemq.com...  Connect up to 31 per DVR
See our online tip

The Kontrol & Kommand module allows remote control of third party electrical
equipment/systems via the alienDVR and our FREE CCTVWindow software.
How it works - The CCTVWindow software sends “Kontrol” signals to the DVR that then forwards them on to
a Kontrol & Kommand module. Each K&K has 8 separate relays that the software can control. The relays can be
made to open or close for adjustable lengths of time, all programmable by the user.
For example, you can send a signal via the CCTVWindow software to
the DVR to open a relay for 2 minutes, you may use this to open a gate Specification:
for a visitor. Or you may send a signal to another relay close for 3 hours
which overrides a central heating controller. You might even trigger a 8 Alarm Inputs/Outputs
third relay to open for 9 minutes to trigger a siren because you have Screw Terminals
spotted intruders. RS232 Interface
RS485 Interface
You can name each function and button in the software so that once 12V DC, 550mA
it’s set up and configured it’s really easy to use. PSU Supplied
208(W) x 125(D) x 31(H)mm
The big beneft of the Kontrol & Kommand unit over the DVR’s own relays
is the ability to control the time each relay is open or closed for. You can
even assign “groups” to the relays. Up to 31 K&Ks can be connected to
each DVR allowing for great fexibility on installations in large buildings.


www.aliendvr.com 35
   30   31   32   33   34   35   36   37   38